Recent images

Forestay showing Hayn Hi-Mod terminal.  Wire is stainless 1x19 7/32"

Outboard engine.  Fresh-water flushed and empty of fuel.  Approx 30-35 hrs on engine.  Two fuel tanks come with.

Fwd. end of boom, showing gooseneck, brz. jaws.

twin-laminate yellow cedar boom

Outboard end of aluminum spreader, showing shroud capture seizing, and cedar roller (preventing genoa chafe)

Stainless steel chainplates.  All turnbuckles are Bronze 

One of two knees at mast partner.  Backing for chainplate shown, typical oak frame also visible at far right.

Base of perimeter-line stanchion.  Painted mild galvanized steel.  Very strong.

Inside of perimeter line stanchion showing fasteners.  Fastened through structural sheer, deck beam, and clamp.

companionway and chart table (port) showing port storage lazarette, storage under chart table.  Custom ladder, and "seat/ counter" aft it.  Both are removable.

Stbd stove (solid fuel) counter-space, storage locker under.  Stbd storage lazarette.

Looking aft from port berth/settee

Same view from further fwd.  Showing compression post, and pilot berth/settee surfaces, as well as deck beam and underside of cabin house.

View of Port side

Top end of compression post

Bottom end of comp. post, showing keel timber and cabin sole "grate"

Oak frames, sheer, notched deck beams

Bottom end of companionway ladder, floors, keel timber, bulkhead and under-cockpit sole storage

Chart table, w/opening top (spruce), floors and oak frames

Nav/instrument storage

"Midget" solid-fuel heater/stove.   

Depth sounder, fwd end of cabin-house, fwd round portlight 

Depth transducer w/bung, battery locker, transducer cable.  This is all under stbd. pilot berth.

Stbd storage beneath cockpit seat

Port under-cockpit storage locker

Foredeck showing skylights, hand rail, and forward end of cabin-house

Cockpit looking fwd. showing aft end of cabin house, compass, sheet winch/cleat, cockpit well

Cabin house roof, nav. light, portlight, companionway slider, mast base

Brz turbuckles

Bow cleat, chafe plate (brz.).  Perimeter line fwd attachments, bow pulpit base, stem fitting, anchor bracket

close up of stem fitting

Honey-locust Bow cleat and brz chafe plate (for anchor chain)

Cabin house and halyard winches

Chain locker (also a water-tight compartment)  showing stem timber, deck beams, hull planking

Compression post, skylights, mast partners, and deck beam detail

Cockpit showing cockpit well, coamings, tiller, and mainsheet traveller on solid brz. mounting

Tiller, mainsheet traveller, custom tiller bracket (helm-tender)

Masthead showing upper shroud chainplate, forestay, spinnaker  halyard block,

Spreader brackets, lower shrouds tang and upper end terminals

Bottom end of mast showing halyard base blocks, spinnaker pole track

Rudder and keel during haulout.